Water For Fuel

Look into my eyes.

Epicdude — Wed, 03 Mar 2010 00:20:00 GMT

I guess I could move to Salem. They got numerous openings starting at 40K for me. But if they got those jobs, then so does my town. I don't mind making less if I can stay right where I'm at. I train people with 4 year degrees. It just sucks because 30% goes to people who do the opposite of what I want them to do in the government. And very little goes to the people outside the government who can help the most (they do it to help, not for the money).

These Popeye cells ain't cheap because they are so pretty!!! The caps are 304SS and everything is milled with precision. high temp plastic is used for the tube cell spacers inside the container.

enjoy the video

If you're going to leave me a crappy comment. Please leave your name, number, and address so I can get back in contact with you.

...onward Christian soldier...

robbed

Epicdude — Mon, 01 Mar 2010 05:29:00 GMT

Well, it is 30 minutes after the application summisions. I tried like nuts, but I didn't get to submit my application.

I can't go another month without money.

There will be no more updates for a long time.

fuck

Candy tits give me the sugar fits

Epicdude — Sun, 28 Feb 2010 02:02:00 GMT

Have you tried the new Chocolate Cheerios yet? They're grrrrRRRATE! WOW! See, I knew you could make healthy food taste good. Now if the people who make cough medicine will make their syrup taste like watermelon. Yea, I understand they make it taste bad to discourage abuse. But it taste so bad I don't want it even when I'm sick. Is that why nurses are so pretty because the doctors' medicine is so bad?

I got the microwave transformer hooked up on both vehicles real good today. Got everything ran for the Dodge. Got 2 wires and 2 microwave diodes left to finish the Trooper. When I get the two diodes I can cut the two wires for the Trooper.

NEW VIDEO

If you've been waiting for the opportunity to promote this project then please add me to your Face Book and My Space friends. When you see me give the signal then spread the word at the speed of madness! I mean it...madness loves to go fast in all directions at once. And on my end I'm going to send out over 50 CDs with this video on it to people on TV, the net, radio, and newspaper. And if you think someone you know needs to see it, well show it to'em!

Got the Pepsi WWW.RefreshEverything.Com application ready to go for tomorrow's entry. The application now has very good English that doesn't sound so rednecktech. Thanks Wendy! And the video, The Hydrogen Revolution, seems to be working well and the feedback is all positive. Make sure you visit WWW.RefreshEverything.Com and get registered and ready for the voting if you love freedom!

The Hydrogen Revolution Video

Thank you Lord.

I'm losing my mind.

Epicdude — Fri, 26 Feb 2010 18:23:00 GMT

For some reason I can't get this video to show up on the Pepsi web site. I've informed Google and Pepsi. I'm going to cry if this video isn't available in my application. Though I do have it there, the link that is, it doesn't do the preview for some reason. So I have been removing the video and replacing it with another slightly different to trick the system into working....to no avail. So I called Pepsi and had the customer service rep make a note that I called about the video not showing up in my application.

All I can do is submit it and hope for the best I guess.

My pencil is sharper than your mind.

Epicdude — Fri, 26 Feb 2010 01:40:00 GMT

No take backeze, no do overs, no double jinx.

OK this is the final cut of the video. The voting won't start until April 1. The link won't be available until then also. But please do view the video below so you get the general idea. Voting is very simple. Just click the VOTE button on the web page. But you can't vote until April 1 because the web page isn't up yet. BUT GET READY! You can leave a comment on the video if you like.

VOTE VIDEO

I got the capacitors on today. It's been a pain to relocate them. The last wires will go on tonight. I am having someone review my Pepsi grant application tonight also. I need some tax advise. Who was it that knew about taxes and stuff? Was it Paul? Just tell me what form I need to fill out for the company. That's all. I sold nothing, I made nothing, I claim nothing.

New Dodge video

Golden Dirt

Epicdude — Mon, 22 Feb 2010 02:55:00 GMT

Do I have any fans in HappyCamp, CA? I need to take a vacation for a week and go gold panning. No phones, no computers, no videos, no electricity, just water rolling over the rocks making so much noise I can't hear myself think or anyone talk to me. Gold is over a $1,000 an Oz and I'm living is the richest gold territory in America broke as a stick. So if anyone in Happy camp would let me park my car at their house and drive me to a nearby creek I'd be so thankful!!!!!

With that said, I got the tube containers for the new Popeye tube cells (7 in 1). They look fantastic (picture below). I'll make the tube cell holder tomorrow. I just found out I had the enter/exit whole made too small on the caps, so back to the machinist on Monday. ...I thought we talked about this kind of crap God?

I need a 10lb roll of wire, but I don't know what size until I do some new experiments with the Popeye cell.

I got both the transformers installed on the Dodge and the Trooper. I haven't finished the wiring yet though. I have to go and find some more microwave diodes again. I need those to split the high voltage from the microwave transformer to the plasma spark. I have to rewire two of the spark plug wires on the trooper because they are just too short. I have two wires to be finished on the Dodge before I start plasma testing and 4-5 wires to finish on the Trooper. ...stupid short wires. So I'll be finished on Monday or Tuesday if the weather is nice.

NEW VIDEO

I still haven't gotten my last DVD from that guy yet. What a slow mail sending sob. I told him to send it 1st Class.

I got one more VOTE movie to post and I'm going to stop thinking about it. What will be, will be. I need everyone to please vote and tell you friends on myspace and facebook to vote in April. There is a Pepsi application on facebook that will speed up the voting process. I'll be posting the video on my main page and spamming everyone when it comes time to vote. I would like a 250K grant, but the 50K grant is almost a sure thing. Sure thing or big thing??? SURE THING OR BIG THING????? Jesus, Lord, God almighty...feel free to step in here anytime and help me.

Other than that....I'm still broke. Anyone want to buy a kidney? I got pints of O+ blood for 50$. But Gold is over $1,000 an ounce! Go weigh out 1 oz of lead, take a knife and shave it up, and that is how much gold you need for a grand. Anyone have a claim or live on the lower Klamath river? Elk Creek? or in HappyCamp?

Juggling Volts and Amps like a clown.

Epicdude — Thu, 18 Feb 2010 04:58:00 GMT

Well I'm almost finished switching the plasma spark systems both on the Dodge and the Trooper.

I'm going to use a microwave transformer secondary to boost my voltage and drop my amps. The volts may go high enough to burn up the 1000v diodes, but I have some 3000v diodes to try also. I just hope I have enough of them.

I have to mount the transformer and run some wire tomorrow and I should be finished with both the Trooper and the Dodge. Today was so pretty. Tommorrow looks good too.

I'm out of $$$ so if you got some change.... send it my way. I got 22$ to my name.

The New VOTE video is available. This may be the final cut. So add me to your facebook and myspace friends and get ready to vote!!!

VOTE video

Wet Dry Run

Epicdude — Tue, 16 Feb 2010 01:24:00 GMT

I need a "copy" of office 2007 with FrontPage. Can anyone set me up with an ftp link to get that?

The Dodge didn't run on water again today because I have it cranked to half power. I know the Dodge isn't going to run without the plasma spark, but when I run the tube cells on medium it always burns the plasma spark diodes out. The plasma spark doesn't want to draw much current when it is alone and can be toned down more by using some resistors. But the tube cells like more amps. The plasma spark alone won't run the Dodge with only water mist. It needs the HHO.

I've been worried about burning up all 80 of the diodes. I got everything working, but the diodes are causing me to hold back on the volts/amps going into the system. So I think I fixed the issue. If I DIDN'T run the tube cells on the same circuit it should work better. Currently if one fails then the other turns off for safety. But that's going to change this week.

Splitting the Systems video

The problem- too many amps in the tube cells and it keeps burning the diodes out in the plasma spark.

The fix- take the plasma spark off the same circuit, but use the same power supply.

The result- the plasma spark system will draw less amps, not what is forced through the tube cells.

The difference- if the plasma spark system fails the tube cells will still work, and visa versa.

So I'm moving the plasma system off the electrolysis system. I can force amps into the tube cells while letting the plasma spark draw off only what it needs. Two separate systems working off the single pulsing alternator.

I should have the Dodge done this week if I can get a few parts. I should also have the Trooper done this week too except I don't have a water tank for it yet. But I can test with a bucket for now I suppose.

Thanks to some generous donations I've been able to stay afloat. I made a land payment and paid rent (400$). I still need some money for parts this week and to pay for the cell phone.

I talked to the machinist and he should have the tube cell container finished this week for Popeye. So I need gas money to drive out there and get the part.

I've posted a new video. It is asking you to VOTE. But the links don't work yet. Please rate the video. I may change it before I try to put my application in for a grant. I think it is finished for the most part. If all goes well the voting will be April 1st through the 30th.

VOTE video

I had a strange idea. One name for it could be photoelectrohordicurlture. In 5th grade science class I learned that plants have an electrical system. I know that some fruits and veggies produce enough voltage to run a small digital clock via electrolytes. Why hasn't someone hooked a bunch of electrodes to a forest of trees, watered them with electrolytes, and used the energy to charge batteries. That is REAL green energy. Plant Energy.

Pulling the trigger

Epicdude — Sat, 06 Feb 2010 04:35:00 GMT

I didn't get the Stan Meyer materials or even a call-back. I guess 50 million isn't a fair offer for some dusty demonstration items and a dune buggy that doesn't run. It's breaks my heart to see it just sit there with all that dust on it rotting. You'd think the owner would do something about it. Here are some links to the Official Offer and accompanying Goals letter I sent to Don who is the middle man for Dave.

GOALS OFFICIAL OFFER

Well I have everything setup on the Dodge now. I got the leaky piece back and put back on, and got all the plasma spark stuff setup and ready to go. It has been too cold to run the full system for at least a week now. Hopefully this weekend will be nice, but the weather man says otherwise.

I have been finishing the system on the Trooper. I put the pump and mister on yesterday. I need to get a 20 gallon water tank, run some tubing, make T drain, and splice 2 tube cells and it will be done. I don't have a plasma spark setup on the Trooper, just plain HHO mist. But I have enough parts to make it have plasma spark in about 6 seconds.

I have built a new alternator called Popeye. It is a 24AWG wire, 30 winds per loop, 15 loop alternator. It is built for medium voltage and amperage. I now have 3 perfect alternators to test with: Bluto, Popeye, and Sweet Pea. Bluto is low voltage and high amps. Popeye is in the middle with moderate volts and amps. And Sweet Pea is high voltage and low amps.

I also have that new 7 tube cell setup I'll be getting from the machinist next week hopefully. This will produce a lot more gas than the 2 or 4 tube cell setup, but won't be so long like individual cells end-to-end. It will also require an little more amps so that is what Popeye and Bluto are for.

The Trooper is looking good and is at least 98% finished now. After I test the Dodge I'll move over to the Trooper. I don't think the 4 tube cells will run the Dodge, but I bet they might run the Trooper. I have a 7 tube cell setup for the Dodge that is almost finished. It will be used in conjunction with Popeye. I sure do wish I had a warm garage to work and do tests in though.

New Dodge Video

I was supposed to get an HEI distributor from a donor in the mail, but it hasn't showed up yet and I lost his email address in my computer crash. Where oh where is that pointless distributor donor?

Monday I'm going to see if the local college needs any computer teachers. I'll move if someone can get me a job being a computer teacher in a little college some where. Have laptop, have skills, will travel.

I lost everything in my main partition on my old hard drive. I have a backup, but it is 6 months old which is a long time when you make progress ever week. I had to buy back the last DVD I sold to someone to get the most current info and I'm waiting for it to show up still. I was able to save some videos from a slave partition, but the main drive partition was toasted as well as I had about 30 bad sectors. I tried numerous pieces of partition recovery software and none worked. Mega bummer wipeout with a broken board dude. Just goes to show you no matter how cool you say your software is, it don't fix broke hardware genius.

I have another opportunity at a grant for 250K from Pepsi Cola. I'll be posting a short video soon that needs your positive vote at least 10 times a day. The more people that vote for the project then the better my chances are for getting the grant. The video will explain everything and voting is as simple as clicking a button. Voting will hopefully start for my project March 5. If you'd like to participate then send a short video to kevin@waterforfuel.com of you saying "Vote for Water for Fuel dot Com". Make it short and sweet, about 3 to 5 seconds worth. You must state in your email with the video clip that I have your permission to use the clip free of charge or legal recourse. I need about 30 people to send me clips. Black, White, Latino, Female, Male, English, Russian, Spanish, British, Greek, ugly, pretty, BIG SMILES!! Dressed Up Characters Welcome! Makes one now and send it to me!! I made you an example below.

VOTE Example video

I'd like to thank everyone who has donated to the project and to keeping me alive. Seriously, the friends and acquaintances that support me is a blessing I never expected when I started this project. I'm glad to help and I'm glad to get such help. If you haven't made a donation yet then please do or buy a DVD.

I'm tired.

Epicdude — Thu, 28 Jan 2010 01:40:00 GMT

My laptop hard drive failed yesterday. That means it is broke on the inside. That means I have lost everything on my computer and I have to buy a new hard drive if I want to use my laptop again. Today I found it is going to cost a 100$ bill to fix it and possibly get back some of the information.

I have no money, I'm almost out of food, I'm out of gasoline, I'm out of time to pay for my cell phone and land bill so I will lose both I guess, both vehicles insurance has been canceled, I can't find a job because there are none, and I'm tired of begging for money. I'm tired Lord....but I've told you that in my prayers every day for a long time. I'm tired Lord...I'm tired.

I wound up a new alternator today from 24AWG wire in efforts to maintain a higer voltage (and more amps) in the setup.

I'm double trouble you milky mister!

Epicdude — Sun, 24 Jan 2010 00:13:00 GMT

Did you know Double Trouble was my nickname when I was a baby? Signified by the double zeros 00.

I posted a video of the .020" and the .060" tube cells Thursday. The videos show little to no increase in voltage or amperage in the tube cells when being tested. There looks to be a fare increase in production with the .020" tube cells at the same volts/amps though. But there has got to be some efficiency...I just can't get a perfect measurement on it because I don't have the equipment.

NEW DOUBLE TROUBLE VIDEO

I haven't noticed a phenomenal difference in the production from using regular pulses from the alternator and using all the transformers and inductors and stuff. Just an increase in efficiency. But still nothing to get excited about even though it all works.

Speaking of work. You want to see what is going on under the hood of the Dodge don't you? Well how does it feel to want?

Well I need some donations. I think another 1,000$ will finish up this for good. It just takes so long to get a 1,000$ and it cost to wait on it. I guess I can show you one milky mister for free....but I need some funds to finish.

NEW MILKY MISTER VIDEO

Lord, please bless me and provide money for this project. Amen.

Slow my roll.

Epicdude — Sat, 16 Jan 2010 02:24:00 GMT

Insanity: Doing the same thing over and over again and expecting a different result.

I had some really good results today under the hood of the Dodge, but decided to show yall my test tube cell setup instead. The .020" tubes cells under the hood are working ggrrREAT! I got my milky white water like I need and prayed for. But we're going to focus on just the testing until this month is over with.

MY NEW VIDEO

Investing means a lot of different things for people, but there is no doubt some investments are better than others. For instance, your education is the best investment you can make other than your eternal investment. People invest in you all the time, whether its their time, money, or love. Learning to invest in the right things, and investing in the wrong things are part of learning to invest. Don't forget that reading, writing, and arithmetic are skills you've invested in, and can make or break any investment. Taking a chance on something isn't doing the work, and you must do work for a change to take hold. And when you pray and things go right for you, remember God invested time in you so you'd walk that path. Invest some time in God and it will benefit you eternally. Smart people invest in prayer. Does investing in prayer work? Well when you're in Hell it doesn't work. So you better invest in prayer before then.

Faster than the Speed of Stan

Epicdude — Thu, 14 Jan 2010 05:01:00 GMT

Like I said, I made an offer on the VW buggy and all the material of Stan Meyer at the beginning of this month. That offer has a 31 day sunset clause (Feb. 1). And 1 second past the sunset and I'm not going to make another offer. I'm too close to being finished to make another offer.

Here are 3 videos of the Stan Meyer material that surfaced about 24 hours ago. I suspect if someone doesn't buy it all up in the next 17 days that the stuff will lose value because I'll be posting the final product soon, starting mass production here and overseas, and gearing up for a national race, then a world race, to sell my product. I'm not a hacker because I'm a slacker...

VIDEO #1

VIDEO #2

VIDEO #3

I made a video today. It is of the .020" tube cells in action. I was very happy with the results. I have the actual tube cells for the Dodge already wired up, but backwards. So tomorrow I'll unhook and rewire them correctly. I replaced the distilled water in the main tank with spring water from Wally World yesterday. The same spring water that is in the test tube cell video below. Clean spring water with nothing else added except some electricity. WOW, it sure is producing more than Stan's stuff.

MY NEW VIDEO

Thank you God for giving me strength, progress, and the unwillingness to succumb to the meek. Slow to read, slow to lead...

A little slap and tickle.

Epicdude — Mon, 11 Jan 2010 05:04:00 GMT

From Tidal Wave to Arrow Wave. Water for Fuel is bringing it to you first!

Click the image below to enlarge it.

I done a few tests with different types of inductors the past few days. And at one point I had 1000 volts in the system. The videos are below.

Thursday's Video

Friday's Video

Sunday's Video

This coming week I'll be swapping out the distilled water in the main Dodge water tank with spring water. I'll be testing some tube cells in spring water that are gapped .020". I'll be reconnecting all the electrical wires to the tube cells under the hood. I'll be looking for the milky white HHO concentrated water coming out of the misters. Then I'll connect the mister hose to the intake manifold misters and test some water for fuel!

The price just went up on that 1% of stock. 45,000$

Did you thank God today? Sinner, Sinner, Bar B Q dinner!

Conditioning

Epicdude — Fri, 08 Jan 2010 01:28:00 GMT

This video should give you a good idea of what I'm doing now.

NEW VIDEO HERE!

Bringing home the bacon.

Epicdude — Thu, 07 Jan 2010 06:20:00 GMT

I still need to "condition" my tube cells evidently. So I'm working on that. I will be posting some more videos of some different tube cells soon.

I got a new diagram for you. Click it to enlarge it. And the government can't stop you so click it twice.

I got a new video for you. This is of a 10nf water cell, distilled water, 255mh dual inductor, and 75 watt light bulb. The video is ended with my resistor between the oscilloscope and the circuit leaves in a cloud of smoke.

NEW VIDEO HERE

The same type of resonance can be achieved going through the bifilar choke and bypassing the light bulb setup. The wave form isn't the same, but the amp restriction is much greater.

I hope Water for Fuel has provided you with something worth more than the cost of a gallon of gasoline. Can I tell you what I need? I need 200$ for a Q-Z-D-LRC meter and I need 200$ for a lot of parts I'm out of. So 400$ would set me right in the spot I can work the best from. If you can spare it, please throw it my way.

I give myself a 400$ Presidential haircut (remember Bill Clinton's ridiculous 400$ haircut?). So I saved the American people 400$ on the famous Bruce Willis hair cut. One hair cut, one shower, and I'm good for another year!

I recently made a very sizable offer for the Stan Meyer VW. This video should be another confirmation of my 100% replication of the Stan Meyer method. I just need to get my tube cells working better and I'll be the second person to make a water powered vehicle.

I have 1% of Water for Fuel Inc. for sale for $20,000. That is 1,000 shares at $2,000 each. From a 1 billion dollar profit, .01% is $10,000,000. Take it or leave it. No payment plans... If you're not first, you're last.

Thanks you God and Jesus for your blessings! And Thank you...yes you the person reading this that donated 20$ or more to my cause. May God bless you as I am blessed. God is Great!

Seize the Day

Epicdude — Mon, 04 Jan 2010 06:31:00 GMT

On December 31st I fixed the electronics issue/ripple problem. By simply moving the stuff away from the distributor it all worked fine. On the 1st I moved them permanently. On the 2nd I tried to get the new test tube cells ready for action.

Sunday (the 3rd) I tried to make a video...got a perfect Tidal Wave, had high voltage, had luke warm distilled water....and no bubbles. I was so pissed off I went and jumped in the frozen lake here and melted the whole lake. So there is something wrong with the tube cells now. God is sure making me work for this cheeseburger. Either the epoxy, the wire, or the ruffing up of the tube cell is causing it to malfunction. The only thing that happened was the water got hot. And all my tube cells have been ruffed up that I'm using. Stan NEVER EVER EVER mentions ruffing up or "conditioning" the tubes. That could be my whole problem.

Man, my Tidal Wave is so beautiful though!

So I'm on a quest to find the perfect tube cell. Is it tuned like a pipe organ and both tubes be 3 inches long? Impossible. Is the finish ruffed up? This could be causing the wave form to not bounce (propagate) in the wave guide properly. Are the tubes the exact same length? If so I'll have to weld some wire to the inside of the inner tube of the cell. Does epoxy work better than silicone? If so then I'm going to write a letter requesting the 100$ I've spent on epoxy back from the manufacturer. But as far as I know the spacers aren't an issue...??? But I can silicone some tube cells and remove the spacers after the silicone dries. I'm going to cry if it is the spacers....and something might get thrown.

I'm just amassed at what the next issue could be. I can only imagine the epoxy is leaking voltage, the ruffing up of the inner and outer tube cell could not be reflecting the wave form properly, the non-corrosive wire I'm using is too much resistance, or the spacer is bogus. I'm going to take apart the original test tube cell and inspect it for replication tomorrow. I have 3 different tube cells to make tomorrow. Sorry for the wait you guys, I'm as anxious as yall are I'm sure.

Wouldn't that be weird if the tube cells worked better the more shinny and smooth their facing surfaces were?? Stan did mention seamless stainless steel and all mine have seems.

Bring on the shinny tube cells and silicone for a spacer!!!

Thanks you Jesus.

Adapt, Adjust, and Overcome.

Epicdude — Thu, 31 Dec 2009 02:57:00 GMT

I still haven't been able to figure out the problem with the ripple in my electrical system that is effecting the electronics. I can see and feel it not controlling the relay properly buy having surges or ripples in the voltage supply.

1. I disconnected the alternator to see if that was causing a ripple.
2. I added a second battery and kept the circuits separate.
3. I replaced my spark plugs with ones that have resistors in them.
4. I added rectifier diodes in the circuits to stop any AC in the line.

Nothing worked, in fact I got the middle finger for trying. So the best thing I can figure is that the distributor is within 2 feet of the electronics and maybe moving it away will stop the ripple. I'm stumped. It doesn't do this on the Trooper and it is within 1 foot of the distributor.

New Video Here.

I'll win this battle, it's just time consuming when all I have are 5 tests left.

There is an LRC Q meter on EBay for 200$ that will calculate everything out for me in the LRC circuit. EVERYTHING! I have been drooling over it for a few days now. Its logical to get it since doing the math only seems to work on paper.

Happy New Year yall!!!

My Christmas present is the Future.

Epicdude — Tue, 29 Dec 2009 05:17:00 GMT

I got the water heater tank back that froze and broke a few weeks ago. It is back on and the water is flowing through the system like it is supposed to. I also have a new 7 tube cell pressure tank 90% finished. Its the titts! I'm stoked! It should work like the inline tube cell except produce a lot more HHO water fuel. Hopefully the stainless steel end caps and tube will be finished this week!!! Because the 7 tube cells, 3 inches long, are finished and waiting for a home.

I got a transformer for my solid state Meyer setup and I'm just waiting for my electronics to come back from Stuart. They should be here in a few weeks or less.

The new test tube cells I made are weird. The capacitance goes up after a short while, which means the distilled water is becoming more resistant..?? When I put fresh distilled water in the cells they both read about 35nF. I have a funny feeling I'll have to put some voltage to the test tube cells and cook them for a few minutes to fix the problem maybe.

I was going to make a movie for you tonight but something is wrong again. It has something to do with either the alternator or the battery, but I got noise in my DC. I moved the electronics into the dash of the Dodge a few days ago and I noticed it then. When the Dodge is running the DC is noisy, but when the Dodge isn't running there isn't any noise in the DC. So I am going to add another battery to the Dodge tomorrow, the one out of the Trooper and see if that helps. Otherwise I may need a separate battery on a dual charging system. Whatever it takes to get that stupid DC to clean up. Because 3 things depend on it now and there is absolutely nothing other than the alternator that can be making the ripple. I already changed out the voltage regulator and that didn't help.

Dammit. And I'm out of cash too. I'm really on empty in the bank and have been for a while because I was waiting on the water tank to do the last tests. Well I got it, I'll fix the ripple in the DC this week, and the final tests will recommence. But the waiting broke me. Please make a donation so I can pay rent.

I also have a new .020" test tube cell almost finished. And I've been doing a lot of reading on complex impedance...WOW. Stan says you need inductance reactance and it makes perfect sense now why.

Sorry for the delay, but I'm back on the job. I literally have 5 more tests to do because everything works again. SO LET'S GO!!! THIS WEEK HOPEFULLY!!!

This new year is going to rock. Thank you Lord. I couldn't have done it without your donations.

Next update on Wednesday!

Who should I contact?

Epicdude — Thu, 17 Dec 2009 08:02:00 GMT

I'm making a list of companies and individuals I am going to contact about my successes. Even though I don't have the Dodge running on water yet, I'm too close to not be forward thinking. So I have a big list already, but...

Who do you think I should contact about my water powered vehicle? Got a list maybe?

I've already talked to Dyno Don about an offer for the VW of Stan Meyer and I'm going to send them an official offer in the next few days. I'm waiting to get Don's email address so I can ask for a mailing address.

So I'm just waiting. I'm waiting on the machinist. I'm waiting on the mail man. And I'm waiting on some money to show up from some where...

NEW VIDEO HERE

I need a transformer that goes from 12 volt to 230 volts like Naudin has. Who has one, where can I get one, how much $ ? I got a big 4 inch torroid on the way so I can wind my own transformer. By winding my own transformer I can do my own impedance matching from it! Below is the JLNaudin schematic of the VIC. CLICK THE IMAGE TO ENLARGE IT

Thank you for my two working eyeballs Lord.